Antminer Z9 Mini 5 + 5 Free
Note: Your order is only final after we confirmed it by sending the invoice.
Note: There are financial risks associated with mining cryptocurrencies. These risks can be related to changes in exchange rate of the cryptocurrency or to changes in the algorithm that is used to mine the cryptocurrency. We would like to reiterate that you should consider carefully before making a purchase.
Note: The price of mining machines must be adjusted frequently according to many factors, including cryptocurrency/USD exchange rate, the network difficulty, expected difficulty increase or changes in the algorithm. Refund requests based on these factors cannot be honored.
Note: Up to two years warranty instead of 180 days.
Buy 5 and Get 5 more free
Hashing algorithm: Equihash
Power consumption: 300W
Hashrate: 10k Sol/s ± 5%
4 in stock
|Parameters of ANTMINER Z9 mini|
|1||Product model||Z9 mini|
|2||Quantity of hash chips per Miner||12 PCS|
|3||Total quantity of hash boards||3 PCS|
|4||Total hash rate||10.0k Sol/s±5%|
|5||DC voltage input||11.60~13.00 V|
|6||DC current input @12V DC input @25℃||20.6 A +5%|
|7||DC Power @12V DC input @25℃||247 W +5%|
|8||220VAC Power @25℃ ,93% conversion efficiency of APW3||266 W +5%|
|9||220VAC Power efficiency @25℃ ,93% conversion efficiency of APW3++||26.6J/Ksol±5%|
|11||Operation temperature||0-40 ℃|
|12||Storage temperature||-40-85 ℃|
|13||Operation humidity||5%RH-95%RH，prevent condensation|
|15||Networking connection mode||Ethernet Cable|
|16||Power connection mode||All PCI-E ports are required to power the board. You can use one PSU to power multiple boards.We suggest to plug in all cable harness before power up PSU.|
PSU: A power supply unit is not included.
You will need an ATX PSU with sufficient (4) six-pin PCIe connectors. All PCIe connectors on a hashing board need to be connected to the PSU for the hashing board to operate. We recommend the APW7 to power the Antminer Z9 mini.
Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 3 PCIE connectors are connected to power supply.
Only logged in customers who have purchased this product may leave a review.