Antminer S9i Specifications:
|Parameters of ANTMINER S9i-14.0|
|2||Total quantity of hash chips||189 PCS|
|3||Total quantity of hash boards||3 PCS|
|4||Total hash rate||14.00 TH/s|
|5||DC voltage input||11.60~13.00 V|
|6||DC current input @12V DC input||102.3 A +10%|
|7||DC Power @12V DC input||1228 W +10%|
|8||220VAC Power @25℃ ,93%conversion efficiency of APW3||1320 W +10%|
|9||220VAC Power efficiency @25℃ ,93%conversion efficiency of APW3||94 J/TH +10%|
|10||Weight（without package）||4.2 kg|
|11||Operation temperature||0-40 ℃|
|12||Storage temperature||-40-85 ℃|
|13||Operation humidity||5%RH-95%RH，prevent condensation|
|15||Networking connection mode||Ethernet Cable|
|16||Power connection mode||All three PCI-E ports are required topower the board. You can use one PSUto power multiple boards, but do not attempt to power one board with two PSUs.
We suggest to prevent the control board to be powered up before hash boards be
Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
PSU: A power supply unit is not included. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!
We recommend the APW7 power supply for use with the Antminer S9i. One power supply supports one Antminer S9i.
Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.